Hover over image to zoom
HS785 Sail Winch Servo
Product Description
The HS-785HB sail winch servo with its large drum wheel has 3 1/2 revolutions of travel for hauling in even the largest of sails. With its dual ball bearing supported output shaft the HS-785HB will provide years of reliable service.
HS-785HB Servo Specifications
| Performance Specifications | |
| Operating Voltage Range (Volts DC) | 4.8V ~ 6.0V |
| Speed (Second @ 60°) | 1.68 ~ 1.38 |
| Maximum Torque Range oz. / in. | 153 ~ 183 |
| Maximum Torque Range kg. / cm. | 11.0 ~ 13.2 |
| Current Draw at Idle | 8 mA |
| No Load Operating Current Draw | 250 mA |
| Stall Current Draw | 1,800 mA |
| Dead Band Width | 5 µs |
| Physical Specifications | |
| Dimensions (Inches) | 2.32 x 1.14 x 1.96 |
| Dimensions (Metric) | 59.0 x 29.0 x 50.0 |
| Weight (Ounces) | 3.88 |
| Weight (Gram) | 110.0 |
| Circuit Type | HT7003 Analog MosFet |
| Motor Type | 3 Pole Metal Brush Ferrite |
| Gear Material | Karbonite |
| Bearing Type | Dual Ball Bearing |
| Output Shaft (type / Ømm) | Standard 24 |
| Case Material | Plastic |
| Dust / Water Resistance | Splash Proof |
| Connector Gauge (AWG) / Strand Count | 22 / 60 |
$49.99
